|
When your designs
require EMI gaskets that exhibit high attenuation and low closure
force, Metex Conductive Fabric gaskets are an ideal choice.
By
combining a soft core with conductive fabrics, we have created
a gasket that will provide >65 dB attenuation at
1 GHz, and compression loads under 4 lbs. per inch at 25%
deflection. Low compression forces allow for lighter, less
expensive enclosure
designs.
Fabric Over Foam gaskets are the ideal gaskets to use with conductive
coatings that can be scratched or damaged by other more abrasive gasket
materials. The conductive fabrics available include abrasion-resistant copper
and nickel.
Custom profiles can be easily created to give you the optimum solution to
your enclosure design. The most widely used profiles are shown on page 2
through 7 in this bulletin. These profiles are available cut to length to fit
your application.
Metex Fabric Over Foam Gaskets offer:
- Excellent electrical conductivity and electromagnetic shielding
effectiveness
- Good abrasion resistance
- Flame-retardant coating to comply with UL94VTM and VTM-0
- Low compressive forces
- Minimal compression set after numerous deflection cycles
- Cost savings
- ROHS Compliance
Conductive Fabric
- Raw Material— Polyester 100%
- Composition—Woven fabric 709-41, taffeta
- Plating—Copper and nickel
- Temperature Limit—200°C
- Excellent Electric Resistance—Less than 0.08 O
- Shielding Effectiveness— 68db~88db from 30 Mhz
to 1Ghz
- Good Abrasion Resistance—Low/high temperature
- UL Flame Class—94VTM-1 & 94VTM-0
KEY FEATURES
- Conductive Fabric— UL94VTM-1 & VTM-0
- Polyurethane Foam— UL94HF-1 & V-0
- Pressure Sensitive Adhesive—UL and MIL classified (UL94 V-0 & HB; File No. E204131, 01SC03508)
- Several Profiles to Choose From
- Custom Profiles Available
- Specialty Foams Available
Polyurethane Foam
| Character |
|
Density |
|
25%ILD |
|
Ball
Rebound |
|
Tensile
Strength |
|
Tear
Resistance |
|
Elongation |
|
Compression
Set C259 |
| Unit |
|
kg/m3 |
|
kg/314cm2 |
|
% |
|
kg/cm2 |
|
kg/cm |
|
% |
|
% |
| SFHL |
|
45±3 |
|
40min |
|
30min |
|
2.0min |
|
0.4min |
|
100min |
|
L20 |
| SF |
|
32±3 |
|
14min |
|
40min |
|
0.9min |
|
0.5min |
|
200min |
|
L20 |
Pressure Sensitive Adhesive (P.S.A.)
| Description |
|
Thickness |
|
Temperature |
|
Color |
|
Strength of Adhesion |
| Adhesive Tape |
|
0.13mm |
|
-40°C to 204°C |
|
Clear |
|
80 oz.inch (87N/100mm) |
Rectangular Type Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0070-11 |
|
0781x.118 |
|
2 |
| 710-1221-0110-11 |
|
.118x.118 |
|
2 |
| 710-1221-0110-15 |
|
.118x.153 |
|
2 |
| 710-1221-0070-15 |
|
.078x.157 |
|
2 |
| 710-1221-0080-15 |
|
.086x.157 |
|
2 |
| 710-1221-0110-15 |
|
.118x.157 |
|
2 |
| 710-1221-0150-15 |
|
.157x.157 |
|
2 |
| 710-1221-0120-18 |
|
.126x.189 |
|
3 |
| 710-1221-0070-19 |
|
.078x.197 |
|
3 |
| 710-1221-0090-19 |
|
.098x.197 |
|
3 |
| 710-1221-0110-19 |
|
.118x.197 |
|
3 |
| 710-1221-0150-19 |
|
.157x.197 |
|
3 |
| 710-1221-0190-19 |
|
.197x.197 |
|
3 |
| 710-1221-0210-19 |
|
.216x.197 |
|
3 |
| 710-1221-0120-21 |
|
.126x.212 |
|
3 |
| 710-1221-0210-21 |
|
.212x.212 |
|
3 |
| 710-1221-0190-21 |
|
.197x.216 |
|
3 |
| 710-1221-0210-21 |
|
.216x.216 |
|
3 |
| 710-1221-0220-22 |
|
.228x.228 |
|
3 |
| 710-1221-0070-23 |
|
.078x.236 |
|
3 |
| 710-1221-0110-23 |
|
.118x.236 |
|
3 |
| 710-1221-0120-23 |
|
.126x.236 |
|
3 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0150-23 |
|
.157x.236 |
|
3 |
| 710-1221-0190-23 |
|
.197x.236 |
|
3 |
| 710-1221-0210-23 |
|
.216x.236 |
|
3 |
| 710-1221-0230-23 |
|
.236x.236 |
|
3 |
| 710-1221-0310-23 |
|
.314x.236 |
|
3 |
| 710-1221-0120-25 |
|
.126x.251 |
|
3 |
| 710-1221-0250-25 |
|
.251x.251 |
|
3 |
| 710-1221-0150-25 |
|
.157x.255 |
|
3 |
| 710-1221-0110-26 |
|
.118x.260 |
|
3 |
| 710-1221-0090-26 |
|
.098x.263 |
|
3 |
| 710-1221-0070-27 |
|
.078x.275 |
|
3 |
| 710-1221-0110-27 |
|
.118x.275 |
|
3 |
| 710-1221-0150-27 |
|
.157x.275 |
|
3 |
| 710-1221-0070-31 |
|
.078x.315 |
|
4 |
| 710-1221-0090-31 |
|
.098x.315 |
|
4 |
| 710-1221-0150-31 |
|
.157x.315 |
|
4 |
| 710-1221-0190-31 |
|
.197x.315 |
|
4 |
| 710-1221-0230-31 |
|
.236x.315 |
|
4 |
| 710-1221-0310-31 |
|
.315x.315 |
|
4 |
| 710-1221-0470-31 |
|
.472x.315 |
|
4 |
| 710-1221-0070-35 |
|
.078x.354 |
|
4 |
| 710-1221-0110-35 |
|
.118x.354 |
|
4 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0130-35 |
|
.137x.354 |
|
4 |
| 710-1221-0230-35 |
|
.236x.354 |
|
4 |
| 710-1221-0070-37 |
|
.078x.374 |
|
4 |
| 710-1221-0120-37 |
|
.126x.374 |
|
4 |
| 710-1221-0250-37 |
|
.251x.374 |
|
4 |
| 710-1221-0370-37 |
|
.374x.374 |
|
4 |
| 710-1221-0070-39 |
|
.078x.393 |
|
5 |
| 710-1221-0090-39 |
|
.098x.393 |
|
5 |
| 710-1221-0110-39 |
|
.118x.393 |
|
5 |
| 710-1221-0150-39 |
|
.157x.393 |
|
5 |
| 710-1221-0170-39 |
|
.177x.393 |
|
5 |
| 710-1221-0190-39 |
|
.196x.393 |
|
5 |
| 710-1221-0230-39 |
|
.236x.393 |
|
5 |
| 710-1221-0290-39 |
|
.295x.393 |
|
5 |
| 710-1221-0310-39 |
|
.315x.393 |
|
5 |
| 710-1221-0330-39 |
|
.335x.393 |
|
5 |
| 710-1221-0390-39 |
|
.393x.393 |
|
5 |
| 710-1221-0510-39 |
|
.511x.393 |
|
5 |
| 710-1221-0460-42 |
|
.460x.421 |
|
5 |
| 710-1221-0070-47 |
|
.078x.472 |
|
6 |
| 710-1221-0090-47 |
|
.098x.472 |
|
6 |
| 710-1221-0110-46 |
|
.118x.462 |
|
6 |
| 710-1221-0230-47 |
|
.236x.472 |
|
6 |
| 710-1221-0250-47 |
|
.255x.472 |
|
6 |
| 710-1221-0310-47 |
|
.315x.472 |
|
6 |
| 710-1221-0470-47 |
|
.472x.472 |
|
6 |
| 710-1221-0360-48 |
|
.362x.480 |
|
6 |
| 710-1221-0370-48 |
|
.370x.488 |
|
6 |
| 710-1221-0120-50 |
|
.126x.500 |
|
6 |
| 710-1221-0250-50 |
|
.251x.500 |
|
6 |
| 710-1221-0370-50 |
|
.375x.500 |
|
6 |
| 710-1221-0500-50 |
|
.500x.500 |
|
6 |
| 710-1221-0070-51 |
|
.078x.511 |
|
7 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0110-51 |
|
.118x.511 |
|
7 |
| 710-1221-0150-51 |
|
.157x.511 |
|
7 |
| 710-1221-0130-51 |
|
.137x.511 |
|
7 |
| 710-1221-0230-51 |
|
.236x.511 |
|
7 |
| 710-1221-0250-51 |
|
.255x.511 |
|
7 |
| 710-1221-0310-51 |
|
.315x.511 |
|
7 |
| 710-1221-0390-51 |
|
.393x.511 |
|
7 |
| 710-1221-0090-55 |
|
.098x.551 |
|
7 |
| 710-1221-0150-57 |
|
.157x.570 |
|
7 |
| 710-1221-0070-59 |
|
.078x.590 |
|
7 |
| 710-1221-0090-59 |
|
.098x.590 |
|
7 |
| 710-1221-0150-59 |
|
.157x.590 |
|
7 |
| 710-1221-0190-59 |
|
.196x.590 |
|
7 |
| 710-1221-0290-59 |
|
.295x.590 |
|
7 |
| 710-1221-0390-59 |
|
.393x.590 |
|
7 |
| 710-1221-0590-59 |
|
.590x.590 |
|
7 |
| 710-1221-0170-61 |
|
.177x.610 |
|
7 |
| 710-1221-0120-62 |
|
.126x.625 |
|
7 |
| 710-1221-0660-66 |
|
.669x.669 |
|
9 |
| 710-1221-0820-66 |
|
.826x.669 |
|
9 |
| 710-1221-0980-66 |
|
.984x.669 |
|
9 |
| 710-1221-0130-70 |
|
.137x.708 |
|
9 |
| 710-1221-0390-70 |
|
.393x.708 |
|
9 |
| 710-1221-0590-70 |
|
.590x.708 |
|
9 |
| 710-1221-0230-78 |
|
.236x.787 |
|
10 |
| 710-1221-0470-78 |
|
.472x.787 |
|
10 |
| 710-1221-0620-78 |
|
.629x.787 |
|
10 |
| 710-1221-0390-98 |
|
.393x.984 |
|
12 |
| 710-1221-0470-98 |
|
.472x.984 |
|
12 |
| 710-1221-0980-98 |
|
.984x.984 |
|
12 |
| 710-1221-0371-00 |
|
.374x1.00 |
|
12 |
| 710-1221-0231-29 |
|
.236x1.299 |
|
12 |
Rectangular Type
PRODUCT APPLICATIONS
- Shielding for
Containment—
To prevent escape of most
or all of the interference
generated by a particular
device, circuit or system as a
disturbing source
- Shielding for
Exclusion—
To prevent the intrusion of
anticipated or known levels
of interference on the performance
of a specific
device, circuit or system
- Exclusion/Containment
Shielding Plus
Pressure Sealing—
To provide pressure containment
as well as EMI/RFI
attenuation
- Grounding and
Contacting—
Not to contain or exclude
but to conduct electrical
current such as discharging
electrostatic energy from
imperfectly grounded structures
to ground, providing a
dependable, low impedance
connection between removable
circuit assemblies and
the host circuit ground plane
and/or power busses, thus
ensuring good contact
between large or massive
electrical structures that do
not mate mechanically due
to dimensional tolerance
In all of these applications,
the solution is found in the use
of highly resilient, high-conductive
shielding materials.
D-Shape Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1121-0090-09 |
|
.090x.090 |
|
2 |
| 710-1121-0120-09 |
|
.125x.090 |
|
2 |
| 710-1121-0120-10 |
|
.125x.102 |
|
2 |
| 710-1121-0070-11 |
|
.078x.118 |
|
2 |
| 710-1121-0110-11 |
|
.118x.118 |
|
2 |
| 710-1121-0130-11 |
|
.138x.118 |
|
2 |
| 710-1121-0050-15 |
|
.059x.150 |
|
2 |
| 710-1121-0110-15 |
|
.118x.150 |
|
2 |
| 710-1121-0150-15 |
|
.157x.157 |
|
2 |
| 710-1121-0070-19 |
|
.078x.196 |
|
3 |
| 710-1121-0190-19 |
|
.196x.196 |
|
3 |
| 710-1121-0070-23 |
|
.078x.236 |
|
3 |
| 710-1121-0170-23 |
|
.177x.236 |
|
3 |
| 710-1121-0190-23 |
|
.196x.236 |
|
3 |
| 710-1121-0210-23 |
|
.216x.236 |
|
3 |
| 710-1121-0130-25 |
|
.134x.255 |
|
3 |
| 710-1121-0190-25 |
|
.255x.196 |
|
3 |
| 710-1121-0230-25 |
|
.255x.236 |
|
3 |
| 710-1121-0190-27 |
|
.276x.196 |
|
3 |
| 710-1121-0180-29 |
|
.299x.189 |
|
4 |
| 710-1121-0390-31 |
|
.315x.393 |
|
4 |
| 710-1121-0110-35 |
|
.354x.118 |
|
5 |
| 710-1121-0120-35 |
|
.354x.125 |
|
5 |
| 710-1121-0120-37 |
|
.375x.125 |
|
5 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1121-0230-37 |
|
.236x.375 |
|
5 |
| 710-1121-0250-37 |
|
.251x.375 |
|
5 |
| 710-1121-0250-38 |
|
.251x.386 |
|
5 |
| 710-1121-0070-39 |
|
.078x.393 |
|
5 |
| 710-1121-0110-39 |
|
.118x.393 |
|
5 |
| 710-1121-0150-39 |
|
.157x.393 |
|
5 |
| 710-1121-0170-39 |
|
.177x.393 |
|
5 |
| 710-1121-0190-39 |
|
.196x.393 |
|
5 |
| 710-1121-0210-39 |
|
.216x.393 |
|
5 |
| 710-1121-0230-39 |
|
.236x.393 |
|
5 |
| 710-1121-0270-39 |
|
.275x.393 |
|
5 |
| 710-1121-0290-39 |
|
.295x.393 |
|
5 |
| 710-1121-0390-39 |
|
.393x.393 |
|
5 |
| 710-1121-0470-39 |
|
.472x.393 |
|
5 |
| 710-1121-0130-43 |
|
.138x.433 |
|
5 |
| 710-1121-0170-43 |
|
.177x.433 |
|
5 |
| 710-1121-0210-43 |
|
.216x.433 |
|
5 |
| 710-1121-0030-47 |
|
.035x.472 |
|
5 |
| 710-1121-0370-50 |
|
.374x.500 |
|
6 |
| 710-1121-0470-68 |
|
.472x.688 |
|
7 |
| 710-1121-0550-70 |
|
.551x.708 |
|
9 |
| 710-1121-0780-70 |
|
.787x.708 |
|
9 |
| 710-1121-0900-70 |
|
.905x.708 |
|
9 |
D-Shape
Flat Type Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0040-07 |
|
.047x.078 |
|
2 |
| 710-1221-0040-11 |
|
.040x.118 |
|
2 |
| 710-1221-0030-15 |
|
.031x.157 |
|
2 |
| 710-1221-0030-15 |
|
.035x.157 |
|
2 |
| 710-1221-0040-15 |
|
.040x.157 |
|
2 |
| 710-1221-0050-15 |
|
.047x.157 |
|
2 |
| 710-1221-0020-19 |
|
.020x.196 |
|
3 |
| 710-1221-0040-19 |
|
.040x.196 |
|
3 |
| 710-1221-0050-19 |
|
.047x.196 |
|
3 |
| 710-1221-0060-19 |
|
.060x.196 |
|
3 |
| 710-1221-0070-19 |
|
.070x.196 |
|
3 |
| 710-1221-0040-23 |
|
.040x.236 |
|
3 |
| 710-1221-0060-23 |
|
.060x.236 |
|
3 |
| 710-1221-0020-27 |
|
.020x.275 |
|
4 |
| 710-1221-0040-27 |
|
.040x.275 |
|
4 |
| 710-1221-0050-27 |
|
.047x.275 |
|
4 |
| 710-1221-0060-27 |
|
060x.275 |
|
4 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0070-27 |
|
.070x.275 |
|
4 |
| 710-1221-0060-30 |
|
.062x.300 |
|
4 |
| 710-1221-0030-31 |
|
.031x.314 |
|
4 |
| 710-1221-0040-31 |
|
.040x.314 |
|
4 |
| 710-1221-0040-35 |
|
.040x.354 |
|
4 |
| 710-1221-0020-39 |
|
.020x.393 |
|
5 |
| 710-1221-0040-39 |
|
.040x.393 |
|
5 |
| 710-1221-0050-39 |
|
.047x.393 |
|
5 |
| 710-1221-0070-39 |
|
.070x.393 |
|
5 |
| 710-1221-0040-47 |
|
.040x.472 |
|
6 |
| 710-1221-0050-47 |
|
.059x.472 |
|
6 |
| 710-1221-0020-51 |
|
.027x.511 |
|
6 |
| 710-1221-0030-51 |
|
.035x.511 |
|
6 |
| 710-1221-0040-51 |
|
.040x.511 |
|
6 |
| 710-1221-0060-51 |
|
.060x.511 |
|
6 |
| 710-1221-0060-55 |
|
.060x.551 |
|
7 |
| 710-1221-0040-59 |
|
.047x.590 |
|
7 |
Flat Type
Special Type Wide Profile (I.O. Gasket) Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0070-70 |
|
.078x.708 |
|
3 x 2 |
| 710-1221-0090-75 |
|
.090x.751 |
|
3 x 2 |
| 710-1221-0080-78 |
|
.080x.787 |
|
3 x 2 |
| 710-1221-0040-82 |
|
.040x.826 |
|
3 x 2 |
| 710-1221-0070-82 |
|
.078x.826 |
|
3 x 2 |
| 710-1221-0090-82 |
|
.098x.826 |
|
3 x 2 |
| 710-1221-0150-82 |
|
.157x.826 |
|
3 x 2 |
| 710-1221-0230-82 |
|
.236x.826 |
|
3 x 2 |
| 710-1221-0070-91 |
|
.070x.913 |
|
3 x 2 |
| 710-1221-0041-06 |
|
.040x1.062 |
|
3 x 2 |
| 710-1221-0081-06 |
|
.080x1.062 |
|
3 x 2 |
| 710-1221-0031-18 |
|
.031x1.181 |
|
3 x 2 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1221-0111-18 |
|
.118x1.181 |
|
3 x 2 |
| 710-1221-0171-27 |
|
.177x1.279 |
|
3 x 2 |
| 710-1221-0081-49 |
|
.080x1.496 |
|
3 x 2 |
| 710-1221-0091-51 |
|
.098x1.516 |
|
3 x 2 |
| 710-1221-0081-57 |
|
.080x1.575 |
|
3 x 2 |
| 710-1221-0121-57 |
|
.125x1.575 |
|
3 x 2 |
| 710-1221-0091-69 |
|
.098x1.693 |
|
3 x 2 |
| 710-1221-0081-77 |
|
.080x1.770 |
|
3 x 2 |
| 710-1221-0092-00 |
|
.098x2.000 |
|
3 x 2 |
| 710-1221-0042-16 |
|
.047x2.165 |
|
3 x 2 |
| 710-1221-0092-16 |
|
.098x2.165 |
|
3 x 2 |
| 710-1221-0082-36 |
|
.080x2.362 |
|
3 x 2 |
Special Type Wide Profile (I.O Gasket)
C-Fold Profile Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1321-0250-23 |
|
.252x.232 |
|
3 |
| 710-1321-0130-29 |
|
.137x.295 |
|
4 |
| 710-1321-0310-31 |
|
.315x.315 |
|
4 |
| 710-1321-0390-31 |
|
.393x.315 |
|
4 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1321-0390-39 |
|
.393x.393 |
|
5 |
| 710-1321-0380-42 |
|
.385x.421 |
|
5 |
| 710-1321-0590-68 |
|
.590x.681 |
|
6 |
C-Fold Profile
Knife Edge Type Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1421-0130-49 |
|
.137x.492 |
|
6 |
| 710-1421-0090-50 |
|
.094x.500 |
|
6 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 0100-50710-1421- |
|
.094x.500 |
|
6 |
| 0250-75710-1421- |
|
.252x.751 |
|
10 |
Knife Edge Type
L-Shape Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1021-0430-43 |
|
.433x.433 |
|
6 (W/PET) |
| 710-1021-0590-55 |
|
.590x.551 |
|
(W/O PET) |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1020-0031-37 |
|
.309x1.387 |
|
— |
L-Shape
P-Type Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1521-0070-31 |
|
.078x.314 |
|
4 |
| 710-1521-0130-52 |
|
.130x.520 |
|
6 |
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1521-0170-63 |
|
.177x.630 |
|
8 |
P-Type
Round Type Specifications
| Part No. |
|
Size (Diameter)
in Inches |
| 710-1020-0090-00 |
|
.098 |
| 710-1020-0120-00 |
|
.126 |
| Part No. |
|
Size (Diameter)
in Inches |
| 710-1020-0430-00 |
|
11.0 |
Round Type
DD-Shape Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1021-0120-37 |
|
.126x.378 |
|
5 |
DD-Shape (Double DD-Shape)
FL-Profile Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1021-0310-70 |
|
.311x.709 |
|
9 |
FL-Profile (Folding Leaf)
U-Shape Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1021-0190-78 |
|
.197x.787 |
|
3 (side) |
| 710-1021-0231-10 |
|
.236x1.102 |
|
3 (side) |
U-Shape
T-Shape Specifications
| Part No. |
|
Size (HxW)
in Inches |
|
Width (PSA)
in MM |
| 710-1021-0150-15 |
|
.157x.157 |
|
2 |
T-Shape (Triangle)
Aluminum Foamed Gasket Specifications
| Part No. |
|
Size (HxW)
in Inches |
| 
